Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Santa Monica
Roof repair in Santa Monica usually means finding the real source of a leak before it spreads, and on the ocean-facing blocks between the bluffs and the 10, that source is typically a failed fastener or flashing, not a worn-out tile. We get called to homes from Ocean Park up to north of Montana when a ceiling stain appears after a marine-layer soak or when Santa Ana winds lift loosened tiles. Bedrock Roof Repair offers inspection, repair, and replacement, and we’ll tell you straight whether you need a targeted fix or a bigger job. Call (833) 589-7850 for a free estimate from a team that knows how salt air changes everything on a Santa Monica roof.
Why Bedrock Roof Repair Is Santa Monica’s Preferred Roof Repair Company
Alan Cofield leads our crews with one rule: diagnose before you quote. That matters in Santa Monica, where a roof can look fine from the street and be failing underneath from years of salt fog and damp marine air. Homeowners here don’t want a sales pitch. They want to know whether the tile they’re looking at is actually the problem or whether the underlayment beneath it gave up first. Our Roof Repair team works that way on every job, from a small vent boot replacement to a full valley rebuild.
We’re not a single-manufacturer shop. We source from GAF, CertainTeed, Owens Corning, IKO, and others because the right material for a 1920s Spanish Colonial in Ocean Park isn’t necessarily the right material for a mid-century condo on Wilshire. A repair-first mindset is baked into our name. If a roof can be fixed properly, that’s what we propose. If replacement is genuinely warranted, we’ll show you the evidence and explain the trade-offs without pressure.
Styles & brands we work with






Metal Roof Repair in Santa Monica
Metal roof repair in Santa Monica carries a different set of demands than inland work because the coastal air attacks fasteners, seams, and flashing far more aggressively than it does the panels themselves. We commonly see rusted-through screws on standing-seam roofs along the ocean-facing slope, especially north of Montana and around Ocean Park, where salt spray and fog settle into every penetration. Repair here means pulling corroded hardware, treating the surrounding metal, and reinstalling with marine-grade or stainless fasteners that won’t rust out in five seasons.
Corroded Fastener and Seam Work
Most metal roof failures on Santa Monica’s west side start small: a rusted screw, a separated seam, a drip edge that’s lost its coating. Left alone, those small failures channel moisture into the decking and insulation. We replace the bad hardware with stainless or hot-dip galvanized options spec’d for coastal exposure, then reseal the seams so the repair blends with the original profile.
Flashing and Penetration Sealing
Chimney saddles, vent pipes, and skylight curbs are where coastal metal roofs leak first. Salt air finds the weakest zinc coating and goes to work. We rebuild these penetrations with marine-grade flashing and sealant rated for continuous moisture exposure, which is the difference between a repair that holds and one that gets re-caulked every two years.
Commercial Roof Repair in Santa Monica
Commercial roof repair in Santa Monica runs into the same coastal corrosion problems as residential work, but with higher stakes: tenant spaces, inventory, and interruption costs. We handle repair scopes on mid-century apartment buildings, retail strips, and condo complexes from the 90401 corridor up through 90403. Multi-unit buildings near the coast often have older torch-down or built-up roofs where seams separate under thermal cycling, and the salt fog accelerates membrane degradation at flashing terminations.
Flat and Low-Slope Repairs
Flat roofs in Santa Monica collect more than rain. They collect salt film, debris from Santa Ana wind events, and standing moisture that never fully bakes off because the marine layer keeps afternoons cool. We patch and reseal compromised membrane, rebuild scuppers and drains, and reinforce the critical laps where roof meets parapet.
Multi-Unit and Tenant-Occupied Properties
Repair work on occupied buildings requires coordination. Santa Monica’s rent-control and tenant-protection rules mean owners often need to schedule inspections and intrusive repairs carefully, and our team works around those constraints. We keep scopes tight and communication clear so a repair doesn’t balloon into a tenant-relations problem.
Trusted Brands We Service in Santa Monica
We install and service products from seven leading manufacturers, including GAF, CertainTeed, Owens Corning, and IKO, so a repair spec can be matched to what’s already on the roof. That’s not a convenience; it’s a necessity in Santa Monica, where a 1930s clay tile roof needs different underlayment and flashing than a 1970s built-up flat roof. We maintain stock of coastal-grade fasteners, sealants, and flashing locally so a repair call on Ocean Park doesn’t mean waiting on a parts shipment from Riverside. Seven leading brands, one honest recommendation, calibrated to what your roof actually needs.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Santa Monica Homes
- Rusted fasteners on ocean-facing tile roofs. Standard galvanized deck screws and nails rust through in a fraction of the time they last ten blocks inland. The tile above still looks new, while the roof leaks at every fastener point.
- Decayed underlayment under older clay tile and wood shingle. Homes built between the 1920s and 1940s in Ocean Park and north of Montana often have original underlayment that’s crumbled from decades of marine-layer moisture. The surface material looks fine; the waterproofing layer beneath is gone.
- Wind-lifted and cracked tile after Santa Ana events. Dry offshore winds loosen tiles already hanging on corroded fasteners, and debris scours clay tile valleys. Repairs after these events usually require resetting tile and rebuilding the valley flashing beneath.
- Mold and moss on north-facing slopes. The combination of fog, shade, and minimal drying sun grows organic matter that holds moisture against the roof surface. That constant damp accelerates corrosion and rot on the slopes that get the least direct sunlight.
Pricing for Roof Repair in Santa Monica, CA
Santa Monica roof repair pricing runs higher than inland LA because materials have to be coastal-spec. A simple vent boot replacement or small flashing repair typically runs $350 to $850. Leak repairs involving tile removal, underlayment patching, and re-setting generally fall between $900 and $2,600 depending on slope access and how much decking needs replacement. Flashing rebuilds around chimneys or skylights run $1,200 to $3,400. A full valley rebuild with ice and water shield and new flashing commonly lands between $2,800 and $6,000. The coastal-spec version costs 15 to 30 percent more upfront than the inland-spec version of the same job. The inland-spec version usually costs more within a decade, because you’re paying to have the same repair done again after the cheap fasteners rust through. Call (833) 589-7850 for a written line-item quote. Estimates are free, and you’ll see every material specified.
We Also Serve Cities Near Santa Monica
Our crews cover Santa Monica and the surrounding westside, including Venice, Century City, Culver City, and Beverly Hills. If you’re on the border of 90402 and Venice, we’re already working in your neighborhood regularly. Call us and we’ll let you know our next available inspection window for your area.
Serving Santa Monica, CA — Our Local Coverage Area
We’re based in the Santa Monica area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Santa Monica
Because on Santa Monica’s ocean-facing slope, the fasteners fail before the tiles do. Salt-laden fog and onshore wind corrode standard galvanized deck screws and flashing to the point of structural failure within a few seasons, while the tile they’re holding still looks nearly new. We inspect fasteners first because that’s where the leak usually starts. Call (833) 589-7850 and our crew will show you exactly what’s on your roof.
A coastal-spec repair uses stainless or hot-dip galvanized fasteners, marine-grade flashing, and sealants rated for continuous salt-moisture exposure. An inland-spec repair uses standard materials that cost less upfront. The coastal-spec version typically runs 15 to 30 percent more on the same scope, but the inland-spec version often fails within a decade on blocks within a mile of the water. For a free estimate that spells out every material, call (833) 589-7850.
The underlayment beneath the tile has most likely decayed, and the fasteners holding the tile have corroded. This is the most common failure mode on 1920s to 1940s homes in Ocean Park and north of Montana. We’ve pulled tile fields where the clay looked nearly new and found the original underlayment crumbled and galvanized nails reduced to pencil-thin rust. The fix is to remove the tile selectively, replace the rotted decking and underlayment, reset the original tile with proper fasteners, and install new flashing. Call (833) 589-7850 for a roof inspection and we’ll tell you what’s actually happening under the surface.
Yes, and that’s something we plan for from the first inspection. Properties in designated historic districts or on the city’s historic resources inventory often require design-review approval before certain exterior changes, and roof work can fall into that category depending on the scope. Santa Monica’s coastal permitting process also tends to move more slowly than inland jurisdictions. We help owners understand which repairs can proceed as maintenance and which may need review, and we build that into the project timeline. Call (833) 589-7850 to discuss your property’s status.
You compare material spec, not just price. Look at fastener type, flashing material, underlayment brand, and sealant rating. A lower bid that specifies standard galvanized fasteners on an ocean-facing roof in 90402 or 90403 is not the same job as a slightly higher bid that specifies stainless and hot-dip hardware. We encourage every Santa Monica homeowner to get line-item quotes and check the material spec line by line. Call (833) 589-7850 for a free estimate with every material named, and we’ll walk you through what to compare.
Need an honest roof assessment in Santa Monica? Call Bedrock Roof Repair at (833) 589-7850 for a free estimate. Alan Cofield and our team serve all Santa Monica zip codes, 90401 through 90403, plus 90411. We’ll tell you what your roof actually needs. Repair when possible. Replace when necessary. Inspect before either.
Written by Alan Cofield, Owner at Bedrock Roof Repair, serving Santa Monica since our first coastal inspection.