Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Anaheim?
Metal roof installation in Anaheim typically runs $9,500 to $28,000 for a standard single-family home, with most jobs landing between $14,000 and $21,000 depending on roof size, panel type, and how much tear-off and decking work your home needs. On a per-square-foot basis, that’s $8.50 to $17 per square foot installed for the Anaheim market in 2026, which sits slightly above the national average because of local labor rates, Title 24 cool-roof rules, and the seismic and wind requirements that shape how we fasten a roof here.
If your home is a 1,600 to 2,200 square foot single-story in a neighborhood like West Anaheim or The Colony, expect the total to fall closer to the middle of that range. Larger two-story homes in Anaheim Hills, or homes with complex rooflines and multiple hips and valleys, push toward the top. We’ll tell you what your roof actually needs before anyone talks about a number.
Key Takeaways
- Most Anaheim homes pay $14,000 to $21,000 for a full metal roof install in 2026.
- Standing seam metal costs more up front than exposed-fastener panels, but lasts longer and handles Anaheim’s sun and Santa Ana winds better.
- Cool-roof coating requirements and Title 24 compliance add real cost, not a rounding error.
- Repair is always evaluated before replacement. Sometimes a metal roof can be repaired for a few hundred dollars instead of replaced.
- Free estimates are available. Call (833) 589-7850 for an exact quote on your roof.
Metal Roof Installation Cost Breakdown (2026)
Here’s how the Anaheim numbers break down line by line. These are installed ranges for 2026, including labor and typical materials, based on the roof conditions we see across the city.
| Line item | Typical range (Anaheim, 2026) |
|---|---|
| Exposed-fastener metal panels (installed) | $8.50 – $12 per sq ft |
| Standing seam metal panels (installed) | $12 – $17 per sq ft |
| Stone-coated steel (Boral, etc.) | $10 – $15 per sq ft |
| Tear-off and disposal of existing shingles | $1.50 – $3 per sq ft |
| Decking repair or replacement (as needed) | $2 – $6 per sq ft |
| Underlayment and flashing | $1.25 – $2.50 per sq ft |
| Cool-roof coating / Title 24 compliance | $600 – $2,000 total |
| Skylight reflash or replacement | $350 – $1,200 each |
| Full 1,800 sq ft single-story, turnkey | $15,000 – $22,000 |
What pushes the total up: standing seam instead of exposed-fastener panels, a steep or cut-up roofline with lots of valleys and penetrations, rotted decking discovered after tear-off, and swapping out skylights or attic vents while the roof is open. What pulls it down: a simple gable roof, keeping your existing roof structure sound, staying with a lighter-gauge panel, and skipping the extras you don’t need. The honest answer is that the biggest swing factor in Anaheim is what’s under the old roof, and we won’t know that until we look.
What Affects Metal Roof Installation Pricing in Anaheim
- Roof size and pitch. A 2,000 sq ft roof with a simple gable is faster and cheaper to install than a 2,000 sq ft roof with six hips and a steep pitch. Steep roofs need more staging, more safety setup, and more time, which shows up on the invoice.
- Panel type and gauge. Exposed-fastener panels are the budget option and work fine on sheds and lower-slope areas. Standing seam is the long-term play for a home you plan to stay in, because the fasteners are hidden under the panel and there are fewer places for water to find a way in.
- Title 24 cool-roof requirements. California’s energy code requires cool-roof-rated products on most re-roofs of conditioned space, and Anaheim enforces it. A metal panel with the right reflectance and emittance rating satisfies this, but it can add a few hundred to a couple thousand dollars over a basic unrated panel.
- Anaheim’s sun and the Santa Ana winds. Our inland location means intense UV and dry heat year-round, plus the seasonal Santa Ana wind events that push gusts through the canyons and across the flatlands. Metal is well suited to both, but the fastening schedule and edge detailing have to be engineered for uplift, not copied from a job in a milder climate.
- Decking and tear-off. Anaheim has a lot of mid-century housing stock, and we regularly find dry rot or delaminated decking under original roofs in West Anaheim and older parts of The Colony. Replacing a few sheets is normal; replacing the whole deck is the exception.
- Roof complexity. Dormers, valleys, chimneys, and added attic ventilation all add labor. A clean rectangle is the exception in Anaheim, not the rule.
We keep material options open on purpose. We source from seven leading manufacturers – GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral – so the recommendation follows the roof and your budget rather than a single supplier’s sales sheet. That breadth matters most on metal jobs, where the right panel profile, coating, and fastening system don’t come from one catalog.
How to Save on Metal Roof Installation
There’s no magic discount on a metal roof, but there are real ways to keep the number down without cutting corners.
- Get the inspection before you decide anything. A lot of roofs that look “done” from the ground are actually repairable. If your metal roof has a handful of loose fasteners or a leaking flashing at the chimney, a targeted repair can cost a few hundred dollars instead of a full replacement. We evaluate repair first, every time, because that’s what the name commits us to.
- Keep the simple retrofits out of the upcharge column. If you’re going to add attic vents or replace a skylight, do it during the install, not after. It’s cheaper while the roof is already open.
- Ask about exposed-fastener where it makes sense. On a detached garage, a covered patio, or a lower-slope section, an exposed-fastener panel can save real money and still perform.
- Bundle with a free estimate and a clear scope. Get the number in writing with line items before you commit. Free estimates mean you can compare apples to apples. Call (833) 589-7850 to set one up.
- Don’t skip the inspection to save a few dollars. The inspection is where the real savings show up, because it tells you whether you need a full re-roof or a repair.
If you’re curious what metal roofing looks like on a neighboring market, take a look at our Metal Roof Installation in Pico Rivera page for comparison pricing and panel options. The same regional rules apply, and the numbers are close.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost in Anaheim in 2026?
Most Anaheim homeowners pay $14,000 to $21,000 for a full metal roof install, with the broader range running $9,500 to $28,000. That works out to roughly $8.50 to $17 per square foot installed. Call (833) 589-7850 for an exact quote on your roof – estimates are free.
Is metal roofing more expensive than asphalt shingles in Anaheim?
Yes, up front. Metal typically costs 1.5 to 2.5 times what an architectural asphalt shingle roof does. A comparable asphalt job might run $8,000 to $14,000 on a 1,800 sq ft home, while metal runs $15,000 to $22,000. The trade-off is lifespan: metal holds up far longer against Anaheim’s sun and wind, which is why it’s often the better total number. Call (833) 589-7850 and we’ll break down both scenarios for your roof, honestly.
How long does a metal roof last in Anaheim’s climate?
A properly installed standing seam metal roof typically lasts 40 to 70 years in Anaheim, well past the 50-year mark for the better coatings. The sun here is hard on roofing, but metal handles UV and heat better than shingle. Call (833) 589-7850 to talk through which panel and coating fit your roof and your plan for the home.
Do I need a permit for a metal roof in Anaheim?
Yes. A re-roof requires a building permit from the City of Anaheim, and the work is inspected for Title 24 cool-roof compliance, fastening, and underlayment. Permit fees typically run a few hundred dollars depending on the valuation of the job. We handle the paperwork and inspections. Call (833) 589-7850 if you want to know what the permit path looks like for your address.
Can metal roofing be installed over my existing shingles?
Sometimes, but not always, and we don’t recommend it as a default. In Anaheim, an overlay can save $2,700 to $5,400 in tear-off and disposal on a 1,800 sq ft roof, but it locks the decking out of sight, and it complicates any future leak diagnosis. On most homes we strongly prefer a full tear-off so we can inspect the deck. Call (833) 589-7850 and we’ll tell you which way makes sense for your roof.
Can you repair my metal roof instead of replacing it?
Often, yes. Loose fasteners, failed sealant at penetrations, and flashing issues can frequently be repaired for $250 to $1,200 rather than replaced. That’s the whole reason we inspect before we quote a replacement. Call (833) 589-7850 and we’ll tell you what your roof actually needs – repair, replacement, or nothing yet.
Why Anaheim Homeowners Call Bedrock
We inspect, repair, or replace, and we do all three under one company, so you don’t get handed off to a different crew halfway through. When the recommendation is metal, you get a real choice of materials from seven leading brands, and a recommendation that follows your roof and your budget instead of a supplier’s incentive. When the recommendation is repair, that’s a fully legitimate outcome, not a consolation prize before an upsell.
We work on Anaheim’s mix of mid-century single-story homes and newer builds, and we know how the local sun, wind, and code requirements shape what a lasting install looks like. Work here is engineered to outlast the next storm season, not to generate a callback. Same team from inspection to final nail.
If you’re ready to get a straight answer on what a metal roof would cost for your home, we’re here to give it to you in writing, line by line, with no pressure. Free estimates, honest scope, and a recommendation that starts with what you actually need.
For a clear picture of the whole scope of services, start at our home page.
Get Your Free Metal Roof Estimate in Anaheim
Call (833) 589-7850 today for a free estimate on metal roof installation in Anaheim. We’ll inspect the roof, tell you what it needs, and give you a written number you can plan around. Repair when possible. Replace when necessary. Inspect before either.
Written by the team at Bedrock Roof Repair, serving Anaheim. Pricing reflects the Anaheim market as of 2026. Bedrock Roof Repair offers free estimates – call (833) 589-7850.
What Our Customers Say
"Valley had been done without proper underlayment and was leaking. Redone correctly, and he explained exactly what had been wrong so I could understand it."
— Veronica Martinez"Storm took part of the ridge off at night. They tarped it the same evening so the rain didn't get in, and did the real repair the following week."
— Alejandro Castillo"Added a ridge vent and cleared the blocked soffit vents. Attic temperature in the summer dropped noticeably and the upstairs is livable now."
— Gabriela Reyes