Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Culver City
A full roof replacement on a Culver City home typically runs $14,000 – $28,000 depending on material, slope, and what the tear-off uncovers. We serve every neighborhood from Carlson Park to Veterans Park, and our crews have been on Culver City rooftops long enough to know what the fog does to a north slope. If you’re seeing ceiling stains, curled shingles, or tile that’s starting to slide, call (833) 589-7850 for a straight assessment. Alan Cofield leads a team that will tell you whether you need a full replacement, a targeted repair, or nothing at all yet.
Why Bedrock Roof Repair Is Culver City’s Preferred Roof Replacement Company
Most roofing companies in this area lead with replacement because that’s where the margin is. We don’t. Our name commits us to a repair-first evaluation on every single job, and that’s the sequence Alan Cofield trained his crews on from day one: inspect, repair what’s fixable, replace what isn’t. When we do recommend a full Roof Replacement in Culver City, you’ll know exactly why, with photos and a written explanation of the failure, not a vague “it’s old.”
Culver City homeowners regularly tell us the same thing: another contractor quoted them a tear-off over the phone without ever walking the roof. We won’t do that. The marine layer here creates two different roofs on the same house, which means a drive-by estimate is worthless. Our crews walk every slope, check the decking, and pull back tile or shingles where it matters before we put a single number on paper.
We carry materials from seven major manufacturers, including CertainTeed, Owens Corning, and IKO, so the recommendation fits your roof and your budget, not a supplier arrangement. And because we’re based in Anaheim with crews working the Westside regularly, a Culver City appointment is a normal day for us, not a special dispatch.
Styles & brands we work with
Reroofing in Culver City
Reroofing in Culver City means installing a new roof covering over the existing one, and it’s an option we evaluate before recommending a full tear-off. For a 1950s stucco tract home in the 90230 or 90232 ZIP codes with a single layer of composition shingle, reroofing typically runs $8,000 – $14,000. If the decking is sound and there’s only one existing layer, it can be a legitimate way to get another 20 years without the demolition cost. But the fog changes the math. If the north slope has been holding moisture against the decking for decades, a reroof hides the rot instead of fixing it.
When Reroofing Makes Sense
A reroof works when the existing shingle or tile layer is still flat, the decking underneath is dry, and the structure can handle the added weight. We see this most often on Culver City’s 1960s duplexes and smaller stucco homes where the original roof was a single layer of asphalt. We’ll inspect the decking from the attic side and in the field before recommending it.
When Reroofing Is the Wrong Call
If the decking is soft, the existing layer is already two thick, or the roof has sagged even slightly, a reroof just buries the problem. On the older wood-shingle homes near Veterans Park, we rarely recommend reroofing because the shingle layer is usually too deteriorated to serve as a base for anything new.
Flat Roof Replacement in Culver City
Flat Roof Replacement in Culver City is a regular part of our week, because this city has a large stock of 1950s and 1960s low-slope duplexes and commercial conversions, especially in 90230 and 90232. A flat roof replacement here typically runs $10,000 – $18,000 depending on the system chosen and the condition of the decking below. The marine layer is harder on flat roofs than on pitched ones: water pools longer, the membrane stays damp through the morning, and any seam or penetration that’s even slightly compromised will eventually leak.
What Flat Roof Replacement Entails
A proper flat roof job means stripping the old membrane, inspecting the decking for fog-driven rot, and installing a new system, usually a modified bitumen or TPO or PVC membrane. We check every penetration: plumbing stacks, HVAC curbs, and the edges where membrane meets parapet. Those are where Culver City flat roofs fail first.
Drainage and Ponding on Low-Slope Roofs
Flat roofs here don’t drain the way they do in the Valley. The morning marine layer leaves the surface wet for hours, and if the roof has even a slight sag, water ponds. We correct slope where it’s practical during replacement, because a flat roof that holds water for 48 hours after rain is a future leak. That’s not a theoretical concern; we see it every winter on Culver City properties.
Trusted Brands We Service in Culver City
We’re not locked into one manufacturer’s product line, and that matters in a city with this much architectural variety. When a Carlson Park Craftsman needs a shingle that holds up to fog on one side and hard sun on the other, we might recommend a CertainTeed or Owens Corning architectural shingle. When a Spanish Colonial needs a clay tile profile to match the original, we can source it. If the job calls for a specific IKO or Atlas product, we’re not going to steer you away because of a supplier contract. For Culver City customers, we stock common shingle colors and flat-roof membrane materials locally, which means less waiting on the Westside when materials need to arrive fast.
Common Roof Replacement Problems We See in Culver City Homes
- Fog-driven leaks that never show up inland. Water wicks under lifted tile or shingle edges on the north slopes, rots the decking and fascia, and only shows itself as a stain months later. By the time you see the ceiling spot, the structural damage is already done.
- Fastener corrosion from salt-laden marine air. Tile underlayment fasteners and shingle nails corrode faster here than in the Valley, which means tiles and shingles can lift even when the surface looks intact. We find this constantly on the 1920s and 1930s homes near the Culver City downtown area.
- Split-personality roof slopes. The same 1940s wood-shingle roof can have shingles that are curled and split on the fog-exposed north slope while the south slope has baked shingles that lost their granules years ago. One roof, two different failure modes, two different tear-off strategies.
- Historic profiles that no one stocks anymore. The clay tile and wood shingle used on Culver City’s Spanish Colonial and Craftsman homes aren’t standard off-the-shelf items. Matching them requires sourcing from specialty suppliers, and not every roofer in Culver City is willing to make that effort.
See the difference
Before
After
Before
After
Before
AfterPricing for Roof Replacement in Culver City, CA
A full tear-off and replacement on a typical Culver City home runs $14,000 – $28,000. Here’s how that breaks down:
- Asphalt shingle roof on a 1,200 – 1,800 sq ft home: $13,000 – $19,000
- Architectural shingle roof with new underlayment: $15,000 – $22,000
- Flat roof replacement on a duplex or low-slope structure: $10,000 – $18,000
- Reroofing over one existing shingle layer (where the decking is clean): $8,000 – $14,000
- Clay tile or specialty historic-profile replacement: $22,000 – $40,000+
What moves the number: decking damage discovered during tear-off, the slope and accessibility of your roof, the material you choose, and any permit-triggered code upgrades once the roof is opened. We do free written estimates, and every quote is an actual line-item breakdown, not a single number with a handshake. Call (833) 589-7850 to schedule yours.
We Also Serve Cities Near Culver City
Our crews work across the Westside, so if you’re in Culver City and have family or property nearby, we can help there too. We regularly serve Ladera Heights, Century City, Venice, and Beverly Hills, and the same repair-first, brand-agnostic approach applies no matter the ZIP code.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Culver City
The marine layer means the north-facing slopes of your roof stay damp for several more hours each day than the south-facing slopes, which accelerates rot in the decking and corrosion in the fasteners that hold clay tile in place. On a 1920s Spanish Colonial, we often find that the north slope needs full decking replacement while the south slope only needs new underlayment. That’s why our Culver City inspections always examine slopes separately. Call (833) 589-7850 and we’ll walk the whole roof, not just what’s visible from the street.
Yes, it can. Once the roof is opened, a Culver City inspector may flag outdated wiring, undersized framing, or other conditions that were grandfathered under the previous roof. We handle this with allowances written into the contract before we start, and any discovery gets priced and approved by you in writing before we proceed. You won’t get a surprise bill at the end.
Yes. We source matching tile and shingle profiles through our network of specialty suppliers, and we’ve matched the original profiles on Spanish Colonials and Craftsman bungalows throughout the 90230 and 90232 ZIP codes. Because we work with seven major brands plus specialty historic suppliers, we’re not limited to whatever one manufacturer currently produces. Call (833) 589-7850 and we’ll tell you what’s available and what it will cost to match your existing roof.
Reroofing installs a new covering over the existing one without a tear-off, and it typically costs $8,000 – $14,000 for a Culver City duplex. A full replacement strips everything to the decking, costs $14,000 – $28,000, and lets us inspect and repair the structure underneath. On the low-slope duplexes common in 90232, the marine layer often means the decking has hidden rot, so a full replacement is usually the better long-term call if the roof is more than 25 years old.
We write a decking allowance into every Culver City replacement contract so you know the unit cost for replacement before we start. If we find soft or rotted decking during the tear-off, we photograph it, show you, and get your written approval on a change order before we replace it. Nothing proceeds without your sign-off, and the price was set in the contract, not invented on the spot.
The Fog-and-Sun Problem No One Else Talks About
Because Culver City’s marine layer keeps the north-facing roof slopes damp longer than the south-facing ones, the same 1940s wood-shingle roof can have shingles that are curled and split on the fog-exposed side while the sun-baked side has lost granules and dried out. That means a roof replacement here often requires two different tear-off and decking repair strategies on a single house. We’ll price the north slope one way and the south slope another, because treating them the same is how you end up with a roof that fails again in five years.
On a 1941 Craftsman bungalow near Carlson Park, our crew found exactly this: the north slope shingles curled and the underlying decking soft from years of fog, while the south slope had baked shingles with missing granules. We replaced the rotted decking, installed new underlayment and ice and water shield in the valleys, and finished with a CertainTeed architectural shingle that matched the original profile. The homeowner had two other quotes that treated the roof as one uniform surface. Ours was the only one that addressed what was actually up there.
Written by Alan Cofield, Owner at Bedrock Roof Repair, serving Culver City and the surrounding Westside with inspection, repair, and replacement since day one.