Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Long Beach
A full roof replacement in Long Beach typically runs between $9,500 and $18,000 for the most common asphalt shingle jobs, with architectural shingles and coastal-spec materials pushing toward the upper end of that range. Clay tile restoration or replacement on the Spanish Revival homes in Belmont Shore and Bluff Park can run $22,000 to $45,000 depending on underlayment condition and fastener upgrades. We’ve worked these streets long enough to know that a Long Beach roof fails differently than one ten miles inland. Call (833) 589-7850 and we’ll tell you what your roof actually needs – repair, replacement, or nothing yet.
The marine layer that rolls in off the Pacific every morning does more than fog up your windshield. It saturates roof surfaces, corrodes fasteners, and rots fascia boards from the inside out. Bedrock Roof Repair sends the same crew from inspection to final nail, and we spec materials that hold up to salt air, not just sun and rain.
Why Bedrock Roof Repair Is Long Beach’s Preferred Roof Replacement Company
Our reputation in Long Beach comes from saying the repair word first. Alan Cofield started Bedrock Roof Repair with a sequence that never changes: inspect, evaluate, then recommend. Long Beach homeowners call us after storms, after leaks, and after other contractors quoted full replacements without ever climbing a ladder. We climb. We measure. We tell you what’s actually failing.
Long Beach’s housing stock is old enough that most roofs are on their second or third layer. The 1920s bungalows in Rose Park and the 1950s tract homes in Los Altos each have their own roof geometry, their own drainage patterns, and their own failure points. Our crews know the difference between a Belmont Shore roof that needs a targeted repair and a North Long Beach roof that’s ready for a full replacement. We don’t hand homeowners off to a different team halfway through. The crew that tears off is the crew that finishes.
We’re licensed and insured, and we pull permits on every full replacement in Long Beach. When the job is done, you get a written workmanship warranty and a roof that’s built for the salt air, not against it.
Styles & brands we work with
New Roof Installation in Long Beach
New Roof Installation in Long Beach usually means a full tear-off down to the decking, a thorough deck inspection, and a rebuild with materials specified for coastal conditions. We do this on homes where the existing roof has reached the end of its structural life, where decking rot is widespread, or where the homeowner wants to start fresh with a longer-warranty system. A standard asphalt shingle new roof on a 1,200-1,800 square foot Long Beach home typically runs $9,500 to $14,500. If the decking needs replacement, add $2 to $4 per square foot for new plywood or OSB.
The Tear-Off Difference
A true new roof installation means removing everything down to the rafters. That’s the only way to see the dry-rot that hides at the soffit edges and the corroded fasteners that look fine from the ground. Going over an existing roof saves money up front, but in Long Beach, layering traps salt moisture between the old and new roof, and that accelerates decay on the layer underneath.
Materials That Belong on a Coastal Roof
For new installations near the coast, we specify stainless steel or hot-dip galvanized fasteners, not the electroplated nails that come in most bundles. We also recommend high-temp self-adhered underlayment instead of standard felt. The price difference is modest on the front end and significant over a decade. We’ll show you both numbers and let you decide with the full picture.
Reroofing in Long Beach
Reroofing in Long Beach means installing a new roof system over the existing shingle layer, assuming the decking is sound and local code allows the additional layer. It’s a legitimate option on some post-war tract homes in Lakewood Village and Los Altos where the roof is a simple gable or hip with one existing shingle layer. A reroof job on a typical Long Beach home runs $7,500 to $12,000 depending on material choice and roof complexity.
When Reroofing Makes Sense
Reroofing works when the decking is dry, the existing shingles are lying flat, and there’s only one layer to begin with. We’ll never recommend it on a home with second-story overhangs that trap morning fog, or on any roof where we can’t verify the deck condition from the attic below. In Long Beach, hidden rot at the fascia and soffit edges reroofing decisions more often than anywhere else we work.
Why We Usually Say No to Layering
The marine layer in Long Beach keeps roof surfaces damp well into the afternoon. Adding a second shingle layer traps that moisture against the old layer and creates a humid microclimate that rots the decking faster. Reroofing has a place, but the salt air narrows the circumstances where it’s smart. Alan Cofield’s rule: if we can’t stand behind the deck for another twenty years, we don’t cover it. We recommend the tear-off, and we explain exactly why.
Trusted Brands We Service in Long Beach
Bedrock Roof Repair sources from seven leading manufacturers and installs them all: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. We stock architectural shingles from GAF and CertainTeed locally for fast turnaround on Long Beach jobs, and if you want Boral concrete tile or a slate-look profile, we’ll order and schedule it without the markup games some roofers play with “special order” materials. Seven brands. One honest recommendation built around your roof’s drainage, pitch, and exposure to the ocean air. We don’t push a single manufacturer because we aren’t tied to one.
Common Roof Replacement Problems We See in Long Beach Homes
- Corroded fasteners on shingle and tile roofs. Standard galvanized or electroplated nails rust through within a few years of Long Beach’s salt-laden onshore breezes. Shingle blow-offs and tile slippage are common even on roofs that look intact from the street.
- Dry-rot at fascia and soffit edges. Morning condensation from the marine layer sits on these board edges for hours every day, especially in fog-belt neighborhoods like Naples and Belmont Shore. By the time you see peeling paint, the wood behind it is often structurally compromised.
- Premature underlayment failure under clay tile. On the 1920s and 1930s Spanish Revival homes around Bluff Park, the tile itself can look fine while the felt or old synthetic underneath has disintegrated from constant dampness. Leaks appear far from the actual failure point.
- Moss and algae streaking on north-facing slopes. The persistent humidity and cool temperatures feed biological growth that holds moisture against the shingle surface. This shortens shingle life and hides granule loss that would be obvious on a drier roof.
See the difference
Before
After
Before
After
Before
AfterPricing for Roof Replacement in Long Beach, CA
The coastal-spec premium – stainless fasteners, high-temp self-adhered underlayment, upgraded drip edge – adds $800 to $1,800 on an average home. The inland-spec version saves that money now and costs you corroded fasteners in five to seven years. We quote both and lay out the ten-year math. Call (833) 589-7850 for a free estimate with line-item pricing on your specific roof.
We Also Serve Cities Near Long Beach
Our roofing crews work throughout the Long Beach area, from the Long Beach waterfront north through Signal Hill, east into Lakewood, and across Carson and West Carson. You’ll get the same Roof Replacement team and the same coastal-spec material standards whether your home is in Naples or a mile from the 405.
Serving Long Beach, CA — Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Long Beach
Why do roofing fasteners fail faster in Long Beach than in inland cities?
Long Beach’s salt-laden onshore breezes deposit chloride ions on every exposed metal surface, and standard electroplated or galvanized nails rust through within five to eight years. The chlorides accelerate oxidation even when the roof looks dry. We specify stainless steel or hot-dip galvanized fasteners on every roof within three miles of the coast. Call (833) 589-7850 if you want us to check the fasteners on your existing roof before the next storm season.
Can you replace my roof without removing the original clay tile?
In many cases, yes. On Spanish Revival homes in Belmont Shore and Bluff Park, we often lift the original clay tile, replace the underlayment, repair any rotted decking, and reset the same tiles with stainless fasteners. This restoration approach preserves the historic look and costs less than full tile replacement. Whether it’s possible on your home depends on tile condition and how many are already cracked or slipped.
How does the marine layer affect roof decking and underlayment?
The marine layer keeps roof surfaces damp well into the afternoon, and that moisture wicks into the plywood decking at the soffit edges and around penetrations. Underlayment fails from constant dampness, not from UV exposure. That’s why every roof replacement in Long Beach includes a full decking inspection and why we use high-temp self-adhered underlayment instead of standard felt in fog-belt neighborhoods. Call (833) 589-7850 and we’ll inspect your decking before recommending anything.
What’s the price difference between a coastal-spec and inland-spec roof replacement?
A coastal-spec roof replacement with stainless steel fasteners, high-temp self-adhered underlayment, and upgraded drip edge typically adds $800 to $1,800 to the total job on an average Long Beach home. The inland-spec version saves that money now and usually needs fastener replacement or shingle repair within a decade. Over a 25-year roof life, the coastal spec is the cheaper option by a wide margin.
Do you use ice and water shield in Long Beach even though it rarely freezes?
Yes, we do. Ice and water shield is a peel-and-stick membrane originally designed for ice dams, but it also provides the best protection against wind-driven rain and the persistent dampness Long Beach roofs face. We install it at eaves, valleys, and around penetrations as a standard part of our coastal roofing spec. It’s not about freezing temperatures here – it’s about the marine layer that never really dries out.
Call Bedrock Roof Repair for Your Long Beach Roof Replacement
On a 1930s Spanish Revival home in Belmont Shore, our crew pulled up the original clay tile to find the underlayment disintegrated and the fascia dry-rotted where ocean air met morning condensation. We replaced the rotten fascia, installed a high-temp self-adhered underlayment, and reset the tiles with stainless steel fasteners and new drip edge – restoring the roof without sacrificing the historic tile. That’s the work we do in Long Beach, and that’s the standard we hold on every job.
Repair when possible. Replace when necessary. Inspect before either. Call (833) 589-7850 to schedule your free estimate, and we’ll give you the straight answer on what your Long Beach roof actually needs.
Written by Alan Cofield, Owner at Bedrock Roof Repair, serving Long Beach with roof inspection, repair, and replacement.