Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Running Springs
Roof replacement in Running Springs typically runs $18,000 – $42,000 for a full tear-off on a standard mountain cabin, with the final number driven by steep-pitch safety rigging, ice-and-water shield code requirements, and whether the original skip sheathing has to be redecked. Most jobs take 5 – 10 working days once materials are staged, though winter weather can compress the window. We work in Running Springs weekly and know the difference between a roof that looks tired and one that’s quietly failing at the valleys. If you’re looking at stains on a ceiling or granules in the gutter, call (833) 589-7850 and we’ll inspect it before anyone recommends replacement.
Why Bedrock Roof Repair Is Running Springs’s Preferred Roof Replacement Company
Our name states the order of operations: we repair what can be repaired and replace what can’t. In Running Springs, that distinction matters because some roofers push full Roof Replacement on every cabin with moss on the north slope, when the actual problem is a failed valley flashing or a clogged scupper. Alan Cofield built Bedrock Roof Repair around that repair-first sequence, and it’s the reason Running Springs homeowners call us after getting quotes elsewhere.
We source from seven leading manufacturers, including CertainTeed, Owens Corning, IKO, and Atlas, so a recommendation follows the roof’s pitch, snow exposure, and budget, not a supplier relationship. Our crews are used to working at elevation, staging materials on steep driveways off Highway 18, and coordinating with second-home owners who aren’t on site. The result is a roof scoped honestly, permitted properly, and documented so you can see what we saw when we opened it up.
Styles & brands we work with
Flat Roof Replacement in Running Springs
Flat Roof Replacement in Running Springs usually applies to additions, porches, detached garages, and the occasional mid-century cabin with a low-slope section, where standing snow sits for weeks and slowly works into any seam or penetration. A flat roof here needs a membrane system rated for ponding water and freeze-thaw expansion, because what works on a flat commercial roof in San Bernardino doesn’t survive a Running Springs winter without reinforcement at the seams and flashings. Typical flat roof replacement in Running Springs runs $9,000 – $18,000 depending on square footage and how many penetrations need to be flashed.
Snow Load and Drainage
Flat or low-slope sections collect snow in ways steep A-frame roofs don’t. We check the framing for deflection before we tear anything off, because a flat roof that’s sagged under past snow loads has to be corrected at the deck level before new membrane goes down.
Membrane Selection for Mountain Weather
We typically recommend reinforced TPO or modified bitumen with ice-and-water shield at all edges and curbs for Running Springs flat roofs. The membrane gets mechanically fastened and heat-welded at seams, which stands up better to repeated freeze-thaw than adhesive-only systems.
Roof Installation in Running Springs
Roof Installation in Running Springs covers both new construction and full tear-off reroofs, and it starts with the deck, not the shingles. Many 1950s – 1980s cabins up here still have original skip sheathing, the 1×6 boards spaced with gaps between them, and you can’t lay new underlayment over that and expect it to pass inspection. We redeck with plywood or OSB, add the code-required ice-and-water shield, then install the shingle system. New roof installation in Running Springs typically runs $20,000 – $45,000 on a full cabin, depending on square footage, pitch, and framing corrections.
Framing Corrections Before the Roof Goes On
Roofs at 6,000 feet carry real weight. If the original framing was undersized or has sagged over decades of snow, the right moment to fix it is when the roof is open. We photograph everything, price any correction in writing, and get your approval before we touch a rafter.
New Construction Roofing
For new builds in Running Springs, we work from the plans and coordinate with the general contractor on roof pitch, ventilation, and flashing details before framing closes. Getting the roof right on a new cabin means the next twenty winters are someone else’s problem.
Trusted Brands We Service in Running Springs
We install CertainTeed, Owens Corning, IKO, and Atlas roofing systems, along with materials from GAF, Tamko, and Boral, because no single manufacturer makes the right product for every Running Springs roof. A steep A-frame with heavy snow needs one set of ratings; a flat porch roof needs another. Because we’re brand-agnostic, the conversation stays on what your roof actually requires. We stage materials locally for Running Springs jobs and keep lead times tight during the building season, so a replacement doesn’t stall while the weather window closes.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Running Springs Homes
- Ice damming at valleys and chimneys. Warm days after a snowstorm push meltwater under old shingles, where it refreezes at night and works its way into the sheathing. Second-home owners often don’t find the damage until the ceiling stains come through in spring.
- Decking rot from trapped moisture. Original skip sheathing and fascia boards behind old shakes soak up decades of condensation and snowmelt, soften, and have to be redecked once the roof is opened, which adds cost but is non-negotiable for a proper install.
- Code-triggered upgrades. Pulling a permit for replacement in Running Springs triggers requirements for drip edge, step flashing, and ventilation that weren’t on the original roof. A tear-off that started as shingle replacement becomes a scope that includes flashing corrections and ridge venting.
- Steep-pitch access problems. A-frame and heavy pitch cabins from the 1960s and 1970s make staging and safety rigging more involved than on a flatland ranch house. Crews working at 10/12 pitch and above move slower, and that labor shows up in the quote.
Pricing for Roof Replacement in Running Springs, CA
A full tear-off and re-roof on a typical Running Springs cabin runs $18,000 – $42,000. Steep-pitch safety rigging adds $1,500 – $3,500 depending on slope and access. Full redecking over original skip sheathing typically adds $2.50 – $4.50 per square foot. Ice-and-water shield is mandatory at eaves and valleys and runs $150 – $300 per 100 square feet installed. Custom flashing work around chimneys and skylights ranges $600 – $1,800 depending on complexity. These are the kinds of numbers we put in writing before work starts, so the final invoice matches the signed scope. Call (833) 589-7850 for a free estimate with line-item pricing, not a ballpark.
We Also Serve Cities Near Running Springs
Our crews run routes between Running Springs and the surrounding mountain communities, so we also handle roof replacement in Lake Arrowhead, Highland, Mentone, and Crestline. If your cabin sits on the ridge or down toward the flatlands, we’ll schedule the same inspection-first approach and give you a written scope before any work begins.
Serving Running Springs, CA — Our Local Coverage Area
We’re based in the Running Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Running Springs
Running Springs requires permits for roof replacement, and the permit triggers code corrections that add cost to a tear-off. When we open the roof, the inspector checks for proper drip edge, step flashing at sidewalls and chimneys, and adequate ventilation. If the original roof lacks these, they become part of the required scope. We build a permit allowance into every Running Springs quote and price any triggered corrections in writing before the work happens, so the permit doesn’t become a surprise invoice at the end. Call (833) 589-7850 for an exact quote with the permit scope included.
No, you can’t properly install architectural shingles over original wood shakes. The shake surface is too uneven, and the underlying skip sheathing won’t support new underlayment. The correct sequence is a full tear-off of the shakes, inspection of the framing, installation of plywood or OSB decking, then ice-and-water shield and the new shingle system. It’s more work up front, but it’s the only way to get a roof that passes inspection and holds up to Running Springs snow loads. Call (833) 589-7850 and we’ll scope it out in person.
Ice damming is what happens when heat escapes from the cabin and melts snow on the upper roof, then the meltwater refreezes at the colder eaves, forming a dam that traps water behind it. At Running Springs’ 5,000 – 6,000 foot elevation with heavy winter snow, that trapped water sits against the shingles and works into the sheathing, usually at valleys and around chimneys. The fix is part roof replacement and part ventilation correction: ice-and-water shield at the eaves and valleys, plus proper ridge and soffit venting so the roof deck stays cold and the snow melts evenly. If you’re seeing water stains in spring, call (833) 589-7850 and we’ll trace the leak before recommending anything.
We run the entire replacement remotely with photo documentation and written change orders for every decision. The homeowner gets photos of the framing, decking, underlayment, and final shingles at each step, and nothing gets touched beyond the signed scope without a text or email approval. For a recent 1960s A-frame off Rim of the World Drive where the original skip sheathing had sagged and the ice-and-water shield had failed at the valleys, we removed the old shakes, installed new plywood decking, laid GAF ice-and-water shield in the valleys, and finished with 130 mph-rated architectural shingles. The owner was off-site the whole time and received documentation of every phase. Call (833) 589-7850 to discuss your cabin.
A roofing square is 100 square feet of roof surface, and we measure the actual plane dimensions from the roof itself, not from the house footprint. On Running Springs cabins with steep pitches, dormers, and valleys, the roof surface area can be 40 – 60% larger than the floor plan, which changes the material and labor estimate significantly. We measure in squares so the contract reflects what’s actually getting installed. Call (833) 589-7850 for a free measurement and line-item estimate.
Written by Alan Cofield, Owner at Bedrock Roof Repair, serving Running Springs and the San Bernardino Mountains.